Search results

Looks like a fire brick from a boiler

I think you bought the 900 from me. If I recall correctly, it was one of the nicest 900s that I ever serviced. I am glad that it found such a good and loyal owner Regards for 2015 Scott

My mistake It is an AquaDiv. I will try to find time to post the "before" picture. Scott

I forgot to mention that this is the single hose version with the very slim first stage Thanks Scott

I am looking for a yoke screw for a very old Divair first stage, 1962 vintage. Will consider the entire thing if anyone has one laying around. I think the aquamatic or anything from 1957 forward might work. I am considering a total working restoration with pictures of the progress, before/after...

Well, in order to resolve this peacefully and not waste any more of my life for a damned first stage, I offered to refund purchase price plus original postage but not return shipping. I take pride in my work, but things sometimes happen so this was the best way I could find to try to satisfy...

I sold it through Ebay and then the guy took it to France. Claimed high IP, slow recovery,creep, corrosion on piston, scratch on seat scratched chrome etc. While I always guarantee everything I sell, and mistakes can happen, there are just too many issues with this one and I do not feel like...

Since I primarily deal only with Sherwood and Dacor, I do not have much call to repair SP products and I thought I could solicit some advice from this forum. I recently did an overhaul on a MK10 which checked out fine when tested before shipping. The problem is, the man now claims there are...

I need a rubber boot to protect a gauge. The gauge is 2 1/2 inches in diameter and 1 1/8 inch thick. This is not an spg, it is an original Dacor IP gauge that I value and I am trying to prolong it's life as I get clumsier[ is that a word?] in my later life

Does anyone have a picture of a 1962 era Aqualung Aqua Div first and second stage[plastic] I think I own one and woud like to see what they looked like in their prime. Regards Scott

Is that #0107-98 by chance? I have the Part/parts you need contact me via PM Regards Scott enloe.d@sbcglobal.net

I would be more than happy to help you any way I can. If you need parts and/or service, contact me and we can discuss it Regards Scott

Has anyone ever heard about a yoke type regulator not fitting onto a tank valve? Reg in question is older sherwood 3500, tank brand is unknown. Is there some type of standard valve out there that I am not familiar with? Scott

Is it a case of the part no longer being available from SP?

Does anyone have a new HP seat retainer #10101106 and seat that they would sell me. I do not have a SP dealer near me and just picked up a very nice first stage with the exception of this part, which has been marred by the use of the wrong tool. Thanks Scott

Dacor IP tool Herman, there is a listing on eBay right now that has on of the IP adjustment tools you were looking for. I would buy the lot just for the tool if he had a better starting price. Look under "scuba tools" and the seller is rbadive. The picture is not that great but it might put you...

If I can be of any help with parts or 2-cents worth of advise, just let me know. I try not to live on the computer but SB is on my bookmarks bar so I check it regularly. Regards Scott

I would keep the XLE and the basic Pacer. The XLB used a special LP seat/stem that was molded together and only used on the XLB metal and the XLP Plastic second stages for a very short time. This part is very hard to find. You could convert the XLB into an XLE by removing the adjustment knob...

Never mind, I answered my own questions and finally found the thread with the info on this board.

I have tried to find the thread about o-ring sizes with no luck so I will just take the easier route and ask. I have decided to order from McMaster Carr [never have] and would like to know what their item numbers are for the following o-rings that I use as common bulk items. HP spool 003, 3/8...