Hello! I have two AI pods that I use with my Teric. I have been using a certain setup that allows me to have both the traditional SPG as well as a AI pod set up on each tank. My current set up is in the photo below. I feel like there is a better way to do it. I have a HP splitter, but it doesn't seem to work because the hose connection puts pressure on the tank (see second photo).
I would love to hear how others are set up with AI on each sidemount tank. Is the majority using a miniSPG and then the pod? **I am trying to get the cleanest setup with minimal snag/failpoint risk. Lets assume that deciding to drop the AI is NOT an option.
Thanks in advance!!
THIS FIRST IMAGE SHOWS MY CURRENT SETUP. Followed by what I thought would work but doesn't.
THE CIRCLE IN RED IS THE AREA THAT DOESN'T FIT. Im unable to tighten/screw my DIN valve on. In this photo, the First stage is barely hanging on. that metal segment on the High SPG hose prevents me from securing the first stage to the tank. You can see I am using the slitter obviously.
I have 90deg elbows,several length hoses, mini spgs and the splitter seen above. Open to any ideas!
I would love to hear how others are set up with AI on each sidemount tank. Is the majority using a miniSPG and then the pod? **I am trying to get the cleanest setup with minimal snag/failpoint risk. Lets assume that deciding to drop the AI is NOT an option.
Thanks in advance!!
THIS FIRST IMAGE SHOWS MY CURRENT SETUP. Followed by what I thought would work but doesn't.
THE CIRCLE IN RED IS THE AREA THAT DOESN'T FIT. Im unable to tighten/screw my DIN valve on. In this photo, the First stage is barely hanging on. that metal segment on the High SPG hose prevents me from securing the first stage to the tank. You can see I am using the slitter obviously.
I have 90deg elbows,several length hoses, mini spgs and the splitter seen above. Open to any ideas!