turandot
Registered
Good news! Thank you so much @mortenscuba
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
There are only five things I need or want to see on the primary dive screen during the dive: depth, time, NDL, tank pressure, and an accurate estimate of gas time remaining to surface with my reserve intact (like everyone else can do but apparently Shearwater cannot). When I begin my ascent, add an ascent rate indicator and, when I reach the safety stop, replace NDL with the stop timer.
Well, not the Peregrine, as you need AI for tank pressure and GTR.[QUOTE = "Carmelo Cruz"] ¿Existe un DC con estas características? Si es así, ¿dónde puedo encontrarlo? [/ QUOTE]
Shearwater Peregrine ?? o Suunto EON Core ??
Well, not the Peregrine, as you need AI for tank pressure and GTR.
I’m really not sure why Guy is not happy with the GTR on the Perdix AI. Per the manual, GTR indicates the amount of time you can remain at the present depth before making a direct ascent @ 33’/min and surfacing with reserve pressure remaining in the tank. It does not include a safety stop in that calculation, but compared to the rest of the dive, the gas consumption at the safety stop is probably a minor concern. I haven’t brought my GTR down to zero, but I’ve had it down to a couple of minutes. Seemed accurate enough as I surfaced with more than reserve pressure after the safety stop.