drrragon
Guest
I just started using a computer, a cobra, and it seemed to be working fine in the water. I uploaded the data into a computer with windows 95. The first dive uploaded with my max depth at 386 feet. The real dive and the computer reading at the time was max at 35 feet. From the surface, the first reading on the upload was 14 feet. The rest of the readings were consistently bad for that dive. I must have died from that profile.
The second dive was more accurate but the pressure readings were different than what was on the cobra at the time of the dive. The depth and temp seemed ok on the cobra and the upload.
Are there any ways to correct this and get consistency as well as accuracy or do I need to bang the side of the cobra?
The second dive was more accurate but the pressure readings were different than what was on the cobra at the time of the dive. The depth and temp seemed ok on the cobra and the upload.
Are there any ways to correct this and get consistency as well as accuracy or do I need to bang the side of the cobra?